Triumph Classic Owners Club - Ireland

The Triumph Herald was a small two-door car introduced in 1959 by the Standard-Triumph Company of Coventry. Body design was by the Italian stylist Michelotti and the car was offered in saloon, convertible, coupé, van and estate variants.
Total Herald sales numbered well over 300,000 and the Triumph Vitesse, Triumph Spitfire and Triumph GT6 were all based around modified Herald chassis and running gear with bolt-together bodies. Heralds are still seen on British roads in the early 21st century.

Sports car range prompts Italian-designed saloon
Towards the end of the 1950s Standard-Triumph offered a range of 2-seater Triumph sports cars alongside its Standard saloons, the Standard 8 & 10, powered by a small (803 cc or 948 cc) 4-cylinder engine, which by the late 1950s were due for an update. Standard-Triumph therefore started work on the Herald. The choice of the "Herald" name suggests that the car was originally intended to be marketed as a Standard, as it fits the model-naming scheme of the time (Ensign, Pennant and Standard itself). By 1959, though, it was thought that the Triumph name had more brand equity and the Standard name was phased out in Britain after 1963.

Triumph Herald 948 Conv. (1962)
Giovanni Michelotte was commissioned to style the car by the Standard-Triumph board, encouraged by Harry Webster, Chief Engineer, and quickly produced designs for a two-door saloon with a large glass area that gave 93% all-round visibility in the Saloon variant and the "razor-edge" looks to which many makers were turning. Fisher & Ludlow, Standard-Triumph's body suppliers, having become part of an uncooperative BMC, it was decided that the car should have a separate chassis rather than adopting the newer monocoque construction. The main body tub was bolted to the chassis and the whole front end hinged forward to allow access to the engine. Every panel – including the sills and roof – could be unbolted from the car so that different body styles could be easily built on the same chassis. Accordingly, in addition to the original coupé and saloon models, van, convertible and estate versions were on offer within two years.
The Standard 10's 4-cylinder 948 cc OHV engine and 4 speed gearbox was used with synchromesh on the top three gears and driving the rear wheels. The rack and pinion steering afforded the Herald a tight 25 feet 0 inches (7.62 m) turning circle). Coil and double-wishbone front suspension was fitted, while the rear suspension, a new departure for Triumph, offered independent springing via a single transverse leaf-spring bolted to the top of the final drive unit and swing axles.
Instruments were confined to a single large speedometer with fuel gauge in the saloon (a temperature gauge was available as an option) on a dashboard of grey pressed fibreboard. The coupé dashboard was equipped with speedometer, fuel and temperature gauges, together with a lockable glovebox. The car had loop-pile carpeting and heater as standard. A number of extras were available including twin carburettors, leather seats, a wood-veneered dashboard, Telaflo shock absorbers and paint options.
Prototype cars embarked on a test-run from Cape Town to Tangiers. An account of the journey was embellished by PR at the time. However only minor changes were deemed necessary between the prototype and production cars. The new car was launched at the Royal Albert Hall, London on 22 April 1959 but was not an immediate sales success partly due to its relatively high cost, approaching £700 (including 45% Purchase Tax). In standard single-carburettor form the 38 bhp (28 kW) car was no better than average in terms of performance, delivering 60 mph (97 km/h) in about 31 seconds and a maximum speed of 70 mph (110 km/h). The rear suspension was also criticised as yielding poor handling at the extremes of performance though the model was considered easy to drive with its good vision, light steering(smallest turning circle of any production car) and controls and ease of repair.

Triumph Herald 1200 (1964)
Optional two-tone paint finishes distinguished the Herald from competitors
Standard-Triumph experienced financial difficulties at the beginning of the 1960s and was taken over by Leyland Motors Ltd in 1961. This released new resources to develop the Herald and the car was re-launched with an 1147 cc engine as the Herald 1200. The new model featured white rubber bumpers, a wooden laminate dashboard and improved seating. Quality control was also tightened up. Twin carburettors were no longer fitted to any of the range as standard although they remained an option, the standard being a single down-draught Solex carburettor. Claimed maximum power of the Herald 1200 was 39 bhp (29 kW), as against the 34.5 bhp (25.7 kW) claimed for the 948 cc model. Disc brakes also became an option shortly afterwards.
Sales picked up despite growing competition from the BMC Mini and the Ford Anglia. The convertible was popular as a 4-seater with decent weatherproofing and the estate made a practical alternative to the Morris Minor Traveller. The coupé was dropped from the range in late 1964 as by then it was in direct competition with the Triumph Spitfire

Courier Van
The Triumph Courier van, a stripped-out Herald estate with steel side panels, was produced from 1962 until 1964, but was dropped following poor sales.

Herald 12/50A sportier version
The Herald 12/50, offered from 1963–1967, featured a tuned engine with a claimed output of 51 bhp in place of the previous 39, along with a sliding (Webasto) vinyl-fabric sunroof and front disc brakes as standard. The power output of the 1200, which remained in production alongside the 12/50, was subsequently boosted to 48 bhp.

Performance test
A saloon tested by The Motor magazine in 1959 was found to have a top speed of 70.9 mph (114.1 km/h) and could accelerate from 0-60 mph (97 km/h) in 31.1 seconds. A fuel consumption of 36.4 miles per imperial gallon (7.76 L/100 km; 30.3 mpg-US) was recorded. The test car cost £702 including taxes of £207.

The Herald 13/60
In October 1967 the range was updated with the introduction at the London Motor Show of the Herald 13/60. The 13/60 was offered in saloon, convertible and estate bodied versions. The sun-roof remained available for the saloon as an optional extra rather than a standard feature. The front end was restyled using a bonnet similar to the Triumph Vitesse’s and the interior substantially revised though still featuring the wooden dashboard. Interior space was improved by recessing a rear armrest in each side panel. The engine was enlarged to 1296 cc, essentially the unit employed since 1965 in the Triumph 1300, fitted with a Stromberg 150D carburettor, offering 61 bhp (45 kW) and much improved performance. In this form (though the 1200 saloon was sold alongside it until 1970) the Herald lasted until 1971, by which time, severely outdated in style if not performance, it had already outlived the introduction of the Triumph 1300 Saloon, the car designed to replace it and was still selling reasonably well but, due to its labour-intensive method of construction, selling at a loss.

Production figures
Triumph Herald 1200 (1968)
Herald 948 saloon: 1959–1964, 76,860948 convertible: 1960–1961, 8,262
Herald coupe: 1959–1961, 15,153
Herald 1200: 1961–1970, 289,575 comprising
  saloon: 201,142
  coupe: 5,319
  convertible: 43,295
  estate: 39,819
  van: approx 5,000
  12/50: 1963–1967, 53,267
  13/60: 1967–1971, 82,650
Remaining cars
Early 948 cc powered cars are rare, convertibles and coupes are especially sought after. Current figures have only 151 coupes remaining worldwide Triumph Herald Database, many in Australia and the USA. Later cars are more numerous.International productionHeralds were assembled in a number of countries other than the United Kingdom, the separate chassis being used as a jig to assemble kits exported from Coventry. To various parts of the world including Ireland Cashel Road plant.

je

• Tweet
• SHARE